Posts

Showing posts with the label HP8300SFF

Controller host USB3.0 recovery

Image
For three years I have been using an  HP 8300 SFF  in the lab to play with BBRF013, RX888 etc. I have made many modifications to the PC. I added a second USB3.0 controller and about two weeks ago I replaced the system disk with an NVME disk. Almost every day I use BBRF103 or RX888. Suddenly yesterday I cannot connect BBRF103 to the original USB3.0 ports on the back of the PC. When I launch the application the message appears : Fortunately, I have two USB3.0 controllers installed . After trying to change cables and BBRF103 I noticed that everything worked consistently if I connected to the ports of the second USB3.0 controller. I tried resetting and switching off/on the PC several times without any success. The solution was:  - backup and make a restore point - in device management disable and uninstall the affected USB controller - shut down the PC - upon restarting the controller was detected and the driver reinstalled automatically and voila now it works again. Th...

A hardware how to with NVMe disk

Image
I installed a new NVMe disk to the  HP 8300 SFF Thanks to Paulie for this post https://www.tachytelic.net/2022/01/hp-compaq-8300-nvme/  My comparison between the SSD disk and the NVMe disk. The gain in access speed is remarkable. I followed the directions in Ivan's comment to Paulie's post to program the bios flash without a hardware programmer. Hereafter the path I followed: 1 backup your data because by continuing you risk losing it 2 f ormat a USB pen with SystemRescue https://www.system-rescue.org/Installing-SystemRescue-on-a-USB-memory-stick/ 3 install the internal jumper to enable the flash access  see  https://www.tachytelic.net/wp-content/uploads/HP-8300-FDO-Flash-Descriptor-Override.jpg 4 b oot from the pen and select SystemRescue to be fully loaded into ram memory. This allows the USB pen to be mounted and used to exchange the files.bin with Windows 5  run:  # flashrom -p internal -c MT25QL128 -r backup.bin 6 find the USBpen dev name with #fdisk -...

The PC part of SDR receiver, a cheap solution

Image
In the development of HF103 rc1 I used a dedicated PC and selected on Amazon an HP Elite 8300 SFF Small Form Factor Business Desktop Computer, Intel Quad-Core i7-3770 up to 3.9Ghz CPU, 8GB RAM, 256GB SSD , DVD, USB 3.0 , Windows 10 Professional (Renewed). It is a recycled PC !  I liked the SFF cover design as it allows you to open and close it very easily. This type of PC is used by Gamers who add an LP graphics card, I used it as it arrived without adding any card. Here a video shows the internals . I had no need to change the fans. It has the HP logo! I’ve been fond of HP since when I met HP instruments and documentation during my working days. See HP Origins - Hewlett Packard Documentary … my subconscious appreciates an SDR with HP logo... Minor mechanical defects may be there. I had to adjust the cover handle mechanism with my unit. I increased the ram to 16 GB as I had the memory sticks in my drawer and added a 1TB HDD to increase data storage space. After installing the Wi...